Tech

Quick Tips to Deal with Netgear Router Not Working Issue

Is your Netgear router not in the mood to work? Are you stuck with this issue despite going about the Netgear router setup process via the Nighthawk app? Nodding your head in yes? Well, the following might be the reasons why this might be happening:

  • The firmware of your router has not been updated for the longest time.
  • Electronic devices that are kept near the router are causing interference.
  • Your Netgear router is plugged into a damaged socket.
  • The antennas located on the router are placed incorrectly.
  • Technical glitches can also cause the issue in discussion.

Get down to reading this instant and learn about the solutions using which troubleshooting the Netgear router not working issue can be resolved in a hassle-free manner. Make sure that your approach towards reading the fixes is careful.

Is Netgear Router Not Working? What to Do?

1.      Upgrade the Router Firmware

Start the troubleshooting process by updating the firmware of your Netgear router to the latest version. For the execution of the process, it is recommended that you access the Nighthawk router setup wizard and refer to the instructions given in the user manual. The remaining process will be explained to you thoroughly there. Once you have updated the device, check whether your device is working properly.

Note: In case you do not want to use the manual method to upgrade the firmware of your Netgear Nighthawk router, then use the mobile app for the same.

2.      Relocate the Wireless Router

Given you are reading this solution; it means that your Nighthawk router is still giving you a hard time. To ensure that it does not do so anymore, change the location of the router and keep it away from electronic devices. Some examples include cordless phones, baby monitors, washing machines, treadmills, televisions, microwave ovens, and much more. Along with this, do not keep the router near metal objects.

Note: Do not keep the router in corners or near thick concrete walls as they can also mess with its signals and lead you to more technical issues.

3.      Cross-Check the Wall Socket

The wall socket to which your device is connected is not getting a proper power supply. It could be because the wall socket is damaged. Did you consider calling an electrician home? No? Well then, you ought to do so now. In case the electrical socket is beyond repair, then consider plugging your router into another wall socket. Make sure that the new socket is in the same room where the modem is kept.

4.      Adjust the Router Antennas

The placement of the antennas located on the Netgear router is supremely important as they decide how well the networking device functions. Thus, check the placement or angle of the antennas. Is it as it should be? In case not, then now is the time to adjust the antennas. To learn about its proper placement, it is recommended that you go through the information given in the manual of your router.

Note: In case you lost the user manual of your router, then going to the official website of Netgear will also help you. Do you not believe us? Check for yourself.

5.      Power Cycle the WiFi Router

As mentioned before, the existence of technical glitches can also cause the router not working issue. To resolve it, you need to restart your wireless router. In other words, you ought to reboot it. For this, just press the power button off and on and hold on for some time. Make sure that once the networking device power cycles, the LED turns green in color as a signal that the process was successful.

Note: By any chance, if the LED light does not become solid after the power cycle process, reboot the router again and wait for the requirement to get fulfilled.

The Conclusion

Despite reading the troubleshooting solutions provided above, in case you still cannot make amends with the router not working issue, then your last resort is to reset the networking device by reading these instructions:

  • First, look for the placement of the reset button.
  • Whenever you find it, press it.
  • Holding on to your horses for some time is needed now.
  • Use an oil pin for the reset process.
  • Let the networking device reboot properly.

Now that you have restored your networking device to the factory default mode, it is recommended that you set it up from the beginning, just like you did the first time. You can use any method that you want for this purpose.

author avatar
Chandler Cosmetic Surgery
Plastic surgery for men is most Popular these modern days. Highly qualified surgeons work with upper eyelid surgery. When we need Eye bag surgery, fat from the eye socket that starts to protrude, swell, become more noticeable, or migrate out of position as we age is the typical cause.

Chandler Cosmetic Surgery

Plastic surgery for men is most Popular these modern days. Highly qualified surgeons work with upper eyelid surgery. When we need Eye bag surgery, fat from the eye socket that starts to protrude, swell, become more noticeable, or migrate out of position as we age is the typical cause.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button